6 continuously variable, pre-programmable blade speeds
2 reverse mixing speeds
2 independent bowl speeds
stainless steel vacuum and noise-reduction cover,
hydraulically operated
with transparent feed hatch
largely made of solid stainless steel
the heavy machine housing, made of solid
stainless steel, provides maximum noise insulation.
a solid, stainless steel partition completely separates the
bowl chamber from the motor compartment.
the front panel features 2 large, easily accessible
cleaning openings
– 120-liter stainless steel bowl
– 400 volts, 3-phase, 50 Hz – control voltage 230 volts
– main motor for three-phase current, IP55, 80 kW power
– thermal overload protection
– built-in fan
– standstill heater for the motor windings
– electric brake
– control panel with cross-lever switch
– frequency converter with intelligent output
current monitoring,
inrush-current-free and capable of handling overloads
up to 1.8 times the rated current
– stainless steel control cabinet with built-in main switch,
– approx. 10 m of control and motor cables between the
machine and the control cabinet,
– the preprogrammable cutter shaft speeds—from slow
mixing speed
to the highest fine-chopping speed—can be selected on the
cutter via a lever switch
– “command 1500” microprocessor-controlled digital
display and control unit
– stainless steel housing, IP66 rated, mounted on the wall
behind the machine
– up to 5 m connection cable to the machine
features:
– stepless programming of the speeds for all
blade speeds, ranging from mixing speed to maximum speed
– adjustable automatic shut-off when either
the temperature or time limit is reached
– display of blade shaft speeds and corresponding gear ratios
– display of temperature and time values with preselected shutdown values for each,
plus an indication of whether these respective shutdown values have been activated
– display of bowl speeds and the corresponding gear ratio for each
– display of actual vacuum values and programmed vacuum setpoints
– service indicator for temperature sensor failure and motor overload
– recessed covers
– noise insulation on the stand base
– enclosed underside of the stand with ventilation and exhaust
– hydraulic cutter cover
– 2-speed bowl drive motor, approx. 3.7/4 kW
– basic hydraulic unit consisting of:
1.5 kW motor, pump, valves, and one cylinder each for raising and
lowering the cutter lid and the product ejector
vacuum system:
– stainless steel main lid, hydraulically operated
– 120 m³ vacuum water ring pump with electric motor
– very small vacuum chamber, resulting in short evacuation times
includes hydraulic loading device, integrated on the left
includes ejector, hydraulic, on the right
includes S24 blade system
with 6 Type V blades
