Kitzinger Crate Washer Spiracon 100

for approx. 100 E2 crates/hour
incl. crate turner (1-man operation)
System structure:
1. Main washing zone:
– with a 2.2 kW centrifugal pump
(900 l/min at approx. 1 bar) distributed across
a total of 50 stainless steel nozzles, enabling
thorough cleaning on all 4 sides. The washing
solution is constantly cleaned and continuously
filtered by a plate filter.
– tank volume 180 l
– tank volume 180 l
– Washing temperature in the main washing zone 50-55°
– The crates are transported via a spiral (KITZINGER
utility model), which ensures precise crate separation
and unhindered impact of the washing solution for
comprehensive cleaning of all sides.
2. Rinse zone:
– the products are rinsed with fresh water from all sides.
– the fresh water must be at least 45°C when fed into
the machine and is heated to approx. 80°C in the system.
– approximately 250-300 liters are required per hour.
Technical data:
– total length of basic machine: 2000 mm
– with box turner: 2500 mm with box turner and
discharge table: 2900 mm
– machine width: 620 mm
– machine height: 1500 mm
– washing tunnel passage width: up to 430 mm (adjustable)
– passage height of washing tunnel: 330 mm
– total heating capacity: Boiler 1x10kW
– pump capacity: 2.2kW 900l/min at 1 bar
– the housing is completely welded and consists
exclusively of stainless steel. The base
is largely made of 3 mm sheet metal and is therefore
very durable.
The machine has the following connections:
– Fresh water with min. 45°C 3/4″,
– Flow pressure min. 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
1/2“ or 3/4” connection
– electricity 14 kW, 400 V, 50 Hz, 32A fuse
– waste water DN 40 in floor drain or channel
near the machine below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– outlet slope for returning water to
the crate floor