6 continuously adjustable, pre-programmable blade speeds
2 reverse mixing speeds
2 independent bowl speeds
Stainless steel vacuum and noise-reduction lid,
hydraulically operated with a transparent filling hatch
with automatic temperature control
largely made of solid stainless steel
the heavy machine housing, made of solid
stainless steel, provides maximum noise dampening.
a solid, stainless steel partition completely separates the
bowl compartment from the motor compartment.
the front panel features 2 large, easily accessible
cleaning openings
– 120-liter stainless steel bowl
– 400 volts, 3-phase, 50 Hz – control voltage 230 volts
– main motor for three-phase current, IP55, 80 kW power
– thermal overload protection
– built-in fan
– standstill heater for the motor windings
– electric brake
– control panel with cross-lever switch
– frequency converter with intelligent output current
monitoring, inrush-current-free and capable of
withstanding overloads up to 1.8 times the rated current
– stainless steel control cabinet with built-in main circuit breaker,
– approx. 10 m of control and motor cables between the
machine and the control cabinet
– The preprogrammable cutter shaft speeds-from slow
mixing speed to the highest fine-chopping speed-
can be selected on the cutter via a lever switch
– autoCommand 2000 microprocessor-controlled digital
display and control system
– IP69, mounted on the wall behind the machine
– up to 5 m connection cable to the machine
Features:
– stepless programming of the speeds for all
blade speeds, ranging from mixing speed to
maximum speed
– adjustable automatic shut-off when
either the temperature or time limit is reached
– display of blade shaft speeds and the
corresponding speed setting for each
– display of temperature and time values with
preselected shutdown values for each, plus an
indication of whether these respective shutdown
values have been activated
– display of bowl speeds and the
corresponding speed setting for each
– display of actual vacuum values and
programmed vacuum setpoints
– service indicator in case of temperature sensor
failure and motor overload
– recessed covers
– noise insulation on the frame base
– enclosed underside of the frame with ventilation
and exhaust
– hydraulic blade cover
– 2-speed bowl drive motor, approx. 3.7/4 kW
– basic hydraulic unit consisting of:
1.5 kW motor, pump, valves, and one cylinder each for
raising and lowering the cutter lid and the
product ejector
vacuum system:
– stainless steel main lid, hydraulically operated
– vacuum water-ring pump, 120 m³, with electric motor
– very small vacuum chamber, resulting in short evacuation times
cooking system:
– nozzle system under the bowl for indirect heating
with steam (steam to be provided by the customer)
– automatic temperature control up to approx. 68–72°C
Includes water inlet
Includes hydraulic loading device, integrated on the left
Includes ejector, hydraulic, on the right
Includes S24 knife system
with 6 Type K knives
